By adopting a linear sensor on the lift line and optimizing the performance of the forklift truck and minimizing power consumption, energy efficiency was enhanced.
Reach in - out with reduced shaking
The eccentric shaft used in the mast undercarriage reduces
mast shaking during reach in–out operations. In addition, the
hydraulic cushion in the added reach cylinder lowers shock
during reach out.
Wide frame - improved work safety
If the triple mast is selected by the customer, the wide frame
standard will be applied to increase the left-right stability of
Increased spacing of forks
To handle a wider range of pallets, the spacing of the left-right forks of the carriage and side shift carriage was increased.
New cluster with enhanced visibility of operating information
A new cluster with increased information visibility: the speed of
driving and mast operation can be adjusted with the button at
A steering handle that is easy to turn quickly
To enhance convenience of operating the vehicle, the steering
handle was designed to be tiltable by up to 10 degrees.
In addition, the number of rotations (lock to lock) of the steering
handle was increased to make the steering feel lighter.
MCV lever with upgraded lever manipulation
The MCV lever and driving lever were relocated to improve the
lever manipulation. Moreover, the force required in MCV lever
manipulation was reduced by 25%.
Handle for getting in and out of the truck comfortably
The truck comes with a lower back cushion pad and a handle
on the top panel that add to safety and convenience when
getting in and out of the vehicle.
Convenient battery maintenance management
The customer can perform maintenance work on the battery
with ease because the reach in-out function allows the
customer to pull out the battery from the front.
Automatic inspection window for hydraulic oil level
The driver can check the remaining hydraulic oil through the
inspection window on the front plate without the need to
remove the cover.
By changing the routing of the brake cable, maneuverability of
pedals (and how brake feel) and durability were improved.
Self - diagnosis of malfunctions and tuning of characteristics
Malfunctions in the controller and
motor can be diagnosed using the
cluster. Driving and mast
operating characteristics can also
Driver seat front guard (Option)
The driver seat front guard protects the driver and the top
panel from falling cargo. This is a very useful option to have
when handling frozen fish products.
Travel speed limit when operating the forklift (Option)
For safety reasons, the travel speed is limited to 3km/h (this
limit is adjustable) when the fork is raised by more than 300
mm from the ground in the case of double-stage mast or if
the free lift zone is exceeded in the case of the triple mast.
Travel speed limit on curved roads
When the vehicle enters a curved path after traveling in a
straight line, the speed automatically decreases by 50% in
order to prevent overturned vehicle accidents.
Maximum travel speed limit
Using the cluster, the maximum travel speed of the vehicle can
be set to match the speed limit at the worksite.